Whether you enjoy repairing sewing machines as a hobby, a job, or your own business, it can be both exciting and challenging. There are so many different models and designs, it can be difficult to keep up.

When you start tinkering with sewing machines, be ready to learn loads of information. There are literally thousands of different models and designs, but there are also some obvious similarities. One of the tricky areas of interest is the hook assembly.

When you look at a sewing machine, one of the first things you need to identify is if the machine has an oscillating or a rotary hook assembly. They do much the same task on your sewing machine, but they do it very differently.

Find the bobbin on the sewing machine. Look under, around, or behind it to find the hook. Rotate the hand wheel forward and watch the hook move. How does it move? If it moves in a complete circle around the bobbin it is a rotary hook assembly. If you look closely, you can see that as the needle comes down and starts back up, the point of the hook slides behind the needle just above the eye. It picks up the thread and pulls it around the bobbin.

The bobbin may be installed just under the needle from the top, on the left end, or on the front lower arm of the machine. If the bobbin inserts from the top, it normally has a rotary hook.

A bobbin installed on the left side of the sewing machine may either have a rotary hook or an oscillating hook. The same is true of front loading sewing machines. For example, while Bernina sewing machines became famous for the CB Oscillating Hook System with front loading, they continue to use front loading on the high end rotary hook sewing machines.

It is easy to tell the difference. Rotary hooks rotate around the bobbin carrier in a continuous circle again and again. Oscillating hooks move to half way around and then go back to start again. The go back and forth " back and forth.

If you have any question, answer this. Does the hook move back and forth (Oscillating Hook) or in a complete circle (Rotary Hook)?

Watch closely. The point of the oscillating hook starts just a few millimeters to the left of the needle when it reaches its lowest point. As the needle rises, the hook moves behind the needle. A loop of thread forms in the small cut out on the back of the needle running above the eye called the scarf. The point of the hook grabs the thread here and pulls it around to the bottom where it releases the thread. It then oscillates back to its original position for another stitch. Bernina used their special patented CB Hook to become a premium sewing machine line.

Both systems do essentially the same thing. As the point of the hook passes behind the needle, it is positioned slightly higher than the eye of the needle. The upward travel of the needle causes a small loop of thread to form on the back side of the needle above the eye and amplified by a space called the scarf which is cut out above the eye. The point of the hook snags the thread from behind the needle and pulls it around the bobbin thread. As the needle rises, the threads are tightened into a lockstitch.

The movement and positioning of the hook and needle must coordinate exactly. Slight variations result in skipped stitches, poorly formed stitches, or no stitches at all. The hook and needle travel through a finite pattern. For each stitch the hook and needle must align perfectly. As the needle rises, the loop must form on the back of the needle. The point of the hook must travel to precisely the right position and at the right moment for the hook to snag the upper thread. This is called Hook Needle Timing.

Adjusting the hook-needle timing is a very common adjustment. If the user breaks a needle, sews on excessively thick material, or debris builds up in the gears; the timing often gets jolted out of adjustment. The specifics of making this adjustment vary considerably from one model to another. Some adjust on gears located directly below the hook. Some adjust at the side or at the end of the lower shaft. Some use timing belts. The essential adjustment is always the same, however, in that the point of the needle must reach the scarf at precisely the right time and in the right way. Check the specific service manual for details on adjusting the hook-needle timing until you gain enough experience and knowledge to adjust it on the fly.

When you consider that there are almost 90,000,000 sewing machines in use today, there are a bunch of sewing machines to service and repair. Sewing machine repair makes a great hobby or business.